Impala V6-3.8L SC VIN 1 (2005)
25. Remove the defroster air duct retaining bolts.
26. Remove the defroster air duct from the cross vehicle beam.
INSTALLATION PROCEDURE
1. Install the defroster air duct to the cross vehicle beam.
2. Install the defroster air duct bolts.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the bolts to 10 N.m (89 lb in).
3. Install the cross vehicle beam to the vehicle.
4. Install the bolts to the right and left side of the cross vehicle beam.
5. Tighten the bolts to the right and left side of the cross vehicle beam in sequence.
Tighten the bolts to 25 N.m (18 lb ft).
