Impala V6-3.8L SC VIN 1 (2005)
License Plate Lamp: Service and Repair
LICENSE LAMP REPLACEMENT
REMOVAL PROCEDURE
1. Remove the screws from the license plate lamp.
2. Remove the license plate lamp from the rear bumper fascia.
3. Remove the license plate lamp socket, turning counterclockwise.
4. Remove the bulb from the license plate lamp socket.
INSTALLATION PROCEDURE
1. Install the bulb to the license plate lamp socket.
2. Install the license plate lamp socket, turning clockwise.
3. Install the license plate lamp to the rear bumper fascia.
4. Install the screws to the license plate lamp.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten the license plate lamp screws to 2 N.m (18 lb in).