Impala V6-3.8L SC VIN 1 (2005)
Canister Purge Solenoid: Service and Repair
EVAPORATIVE EMISSION (EVAP) CANISTER PURGE SOLENOID VALVE REPLACEMENT
REMOVAL PROCEDURE
1. Remove the fuel injector sight shield.
2. Disconnect the evaporative emission (EVAP) canister purge valve electrical connector.
3. Disconnect the EVAP canister purge valve purge pipe and the vacuum supply hose.
4. Release the tab on the EVAP canister purge valve mounting bracket and remove the EVAP canister purge valve.
INSTALLATION PROCEDURE
1. Install the EVAP canister purge valve on the EVAP canister purge valve mounting bracket.
2. Connect the EVAP canister purge valve purge pipe and the vacuum supply hose.
3. Connect the EVAP canister purge valve electrical connector.
4. Install the fuel injector sight shield.