Impala V6-3.8L SC VIN 1 (2005)
9. Remove the fuel injector electrical harness clips holding harness to front and the rear of the fuel rail.
10. Remove the engine mount strut bolt and nut from the left engine mount strut.
11. Reposition the wiring harness from the left engine mount strut bracket.
12. Remove the fuel rail hold-down nuts.
13. Remove the fuel rail hold-down stud.
14. Remove the fuel rail with equal force on both sides of the fuel rail.
INSTALLATION PROCEDURE
CAUTION: In order to reduce the risk of fire and personal injury that may result from a fuel leak, always install the fuel injector O-rings in