Impala V6-3.8L SC VIN 1 (2005)
![background image](/chevrolet/impala/v6-3.8l_sc_vin_1/Page-1616001.png)
Power Steering Fluid Cooler: Service and Repair
Power Steering Cooler Replacement
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Place a drain pan under the vehicle.
3. Remove the power steering cooler hoses from the power steering cooler.
4. Remove the bolts from the power steering cooler.
5. Remove the power steering cooler from the vehicle.
Installation Procedure
1. Install the power steering cooler to the vehicle.
Notice: Install the bolts to the power steering cooler.
2. Tighten the retaining bolts to 14 Nm (124 inch lbs.).
3. Install the power steering cooler hoses.
4. Bleed the power steering system.