Impala V6-3.8L SC VIN 1 (2005)
5. Install the oil cooler pipes (3,4) to the oil cooler fittings (2).
Notice: Refer to Fastener Notice in Service Precautions.
6. Install the transaxle oil cooler hose/pipes retaining bracket bolt (5).
Tighten the bolt to 4 Nm (27 inch lbs.).
7. Install the lower radiator air deflector.
8. Remove the drain pan from under the vehicle.
Notice: Refer to Transmission Overfill Notice in Service Precautions.
9. Adjust the fluid level.
10. Inspect for fluid leaks.