Impala V6-3.8L SC VIN 1 (2005)
Transmission Mount: Service and Repair
Transmission Mount Bracket Replacement - Left
Transmission Mount Bracket Replacement - Left
Removal Procedure
1. Raise and support the vehicle. Refer to Vehicle Lifting.
2. Remove the left front tire and wheel assembly.
3. Remove the left engine splash shield.
4. Support the transaxle.
5. Remove the transaxle bracket to transaxle mount upper nuts.
6. Remove the bolts which secure the transaxle bracket to the transaxle.
7. Remove the transaxle bracket.
Installation Procedure
1. Position the transaxle bracket to the transaxle.
Notice: Refer to Fastener Notice in Service Precautions.
2. Install the transaxle bracket bolts.
Tighten the bracket bolts to 95 Nm (70 ft. lbs.).
3. Remove the support from the transaxle.