Impala V6-3.8L VIN K (2004)
2. Use a small, flat-bladed tool in order to release the 2 retainers. These retainers are located on each side of the assembly in front of the switches.
Press the retainers outward to release the roof console.
3. Lower the roof console from the headliner.
4. Disconnect the electrical connectors from the roof console.
5. Remove the roof console.
6. Remove the sunshade anchors.
7. Lower the headliner at the sunroof opening. Reach between the headliner and the roof to remove the foam tape from the wiring harness on the roof
console backing plate.
8. Adjust the wiring harness for access.