Impala V6-3.8L VIN K (2004)
Ambient Light Sensor: Service and Repair
DAYTIME RUNNING LAMPS (DRL) AMBIENT LIGHT SENSOR REPLACEMENT
REMOVAL PROCEDURE
1. Remove the garnish molding from the left windshield pillar.
2. Starting at the left side, carefully lift upwards on the instrument panel (IP) upper trim panel in order to release the retainers from the IP upper trim
pad. Work towards the right in order to access the daytime running lamp (DRL) ambient light sensor.
3. Remove the DRL ambient light sensor from the IP upper trim panel by twisting the sensor 1/4 turn counterclockwise.
4. Remove the DRL ambient light sensor from the DRL ambient light sensor connector.
INSTALLATION PROCEDURE