chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Interior - Power Window Switch Removal Precaution|Page 11438 > < Diagram Information and Instructions|Page 11432
Page 1
background image

Power Window Switch: Technical Service Bulletins
Interior - Power Window Switch Removal Precaution

Bulletin No.: 04-08-64-007

Date: April 22, 2004

INFORMATION

Subject:
Proper Removal of Power Window Switch to Avoid Damage to Door Trim Pad or Power Window Switch - Remove Trim Pad First

Models:
2004 Chevrolet Malibu Maxx

To replace the left front door power window switch, the door panel must be removed. There is a retaining clip at the front of the switch and two retaining
tabs on the side of the switch. The clip and tabs must be released from the back side of the door panel. Trying to pry the switch out of the door trim panel
without releasing the tabs and clip from the back will result in damage to either the door trim panel, the switch bezel or both. may result.

When removing the door trim panel, be careful not to pull on the wire to the trunk release switch, or damage to the switch.

Disclaimer

Interior - Power Window Switch Removal Precaution|Page 11438 > < Diagram Information and Instructions|Page 11432