chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Energy Absorber Pad Replacement - Inner Front|Page 17052 > < Energy Absorber Pad Replacement - Inner Front|Page 17050
Page 1
background image

Front Door Panel: Service and Repair
Front Side Door Water Deflector Replacement

Front Side Door Water Deflector Replacement (Impala)

Removal Procedure

1. Remove the front door trim panel. Refer to  Front Side Door Trim Panel Replacement (Impala) .
2. Remove the front door pull handle bracket from the front door inner panel.
3. Disconnect all of the required electrical connectors.
4. Remove the inside door handle gasket.
5. Remove the front door water deflector from the front door inner panel.

Installation Procedure

1. Align the front door water deflector to the front door inner panel. Secure the water deflector at the corners.
2. Pull the front door wiring harness leads through the slits in the front door water deflector.
3. Install the front door water deflector, start pressing the adhesive pattern at the bottom center and working outward and upward in order to prevent

puckering.

4. Install the inside door handle gasket.
5. Connect all of the required electrical connectors.
6. Install the front door pull handle bracket to the front door inner panel.
7. Install the front door trim panel. Refer to  Front Side Door Trim Panel Replacement (Impala) .

Energy Absorber Pad Replacement - Inner Front|Page 17052 > < Energy Absorber Pad Replacement - Inner Front|Page 17050