Impala V6-3.9L (2007)
9. Remove the hood release cable from the vehicle.
Installation Procedure
1. Transfer the string to either end of the new hood release cable.
2. Route the string and the hood release cable into the passenger compartment.
3. Remove the string from the hood release cable.
4. Seat the hood release cable grommet (1) into the cowl.
5. Connect the hood release cable to the hood release handle.
6. Install the carpet retainer. Refer to Front Carpet Retainer Replacement (Impala) Front Carpet Retainer Replacement (Monte Carlo) .
7. Pull the string and the hood release cable into the engine compartment.
8. Remove the string from the hood release cable.
9. Install the hood release cable (1) from the hood latch (2).
10. Install the hood latch. Refer to Hood Latch Replacement .
11. Close the hood.