Impala V6-3.9L (2007)
1. Coat the ends of the pushrods using prelube. Refer to Sealers, Adhesives, and Lubricants.
2. Install the pushrods.
*
The intake pushrods are identified with yellow stripes.
*
The exhaust pushrods are identified with blue stripes.
3. Ensure that the pushrods seat in the lifter bore.
4. Coat the rocker arm friction surfaces using prelube. Refer to Sealers, Adhesives, and Lubricants.
Important: Shims (88894006) may be required under the valve rocker arm pedestals if reconditioning has been performed on the cylinder
head or its components.
5. Install the rocker arms.
Notice: Refer to Fastener Notice.
6. Install the rocker arm bolts.
Tighten the bolts to 34 N.m (25 lb ft).
7. Install the valve rocker arm covers.
