chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Spot Lamp Replacement (Impala RPO 7X6, 7X7)|Page 18984 > < Spot Lamp Replacement (Impala RPO 7X6, 7X7)|Page 18982
Page 3
background image

*  The handle must rotate the spotlamp approximately 90 degrees about the spot lamp shaft axis from the parked position to the vertical

position.

*  The spot lamp head must rotate 360 degrees about its axis.
*  The spot lamp must able to be turned ON/OFF independent of the ignition switch.

13.  If spot lamp adjustment and/or electrical diagnosis are required, refer to the following procedures.

*  For spot lamp travel adjustment, Refer to Spot Lamp Travel Adjustment (Impala RPO 7X6, 7X7).
*  For electrical diagnosis, Refer to Power Distribution Schematics in Wiring Systems.

Spot Lamp Replacement (Impala RPO 7X6, 7X7)|Page 18984 > < Spot Lamp Replacement (Impala RPO 7X6, 7X7)|Page 18982