Impala V6-3.9L (2007)
Notice: Refer to Fastener Notice.
3. Install the BARO sensor bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the engine wiring harness electrical connector to the BARO sensor.
5. Install the intake manifold cover.
Notice: Refer to Fastener Notice.
3. Install the BARO sensor bolt.
Tighten the bolt to 10 N.m (89 lb in).
4. Connect the engine wiring harness electrical connector to the BARO sensor.
5. Install the intake manifold cover.