Impala V6-3.9L (2007)
Canister Purge Solenoid: Service and Repair
Evaporative Emission Canister Purge Solenoid Valve Replacement
Removal Procedure
1. Remove the intake manifold cover.
2. Disconnect the evaporative emission (EVAP) canister purge solenoid electrical connector (1).
3. Disconnect the chassis EVAP pipe from the EVAP canister purge solenoid.
4. Remove the EVAP canister purge valve bolt.
5. Remove the EVAP canister purge valve.
Installation Procedure