Impala V6-3.9L (2007)
Evaporative Emissions Hose: Service and Repair
Evaporative Emission Hoses/Pipes Replacement - Engine/Chassis
Removal Procedure
Important: Clean the evaporative emission (EVAP) connections and surrounding areas prior to disconnecting the line in order the avoid
possible system contamination.
1. Remove the air cleaner outlet duct.
2. Remove the brake master cylinder and reposition.
3. Disconnect the EVAP (2) line from the purge solenoid.
4. Open the fuel/brake pipe retainers (1).
5. Remove the EVAP line from the fuel/brake pipe retainers (1).
6. Raise and support the vehicle.Refer to Vehicle Lifting.