Impala V6-3.9L (2007)
4. Connect the TOC inlet hose to the transaxle.
5. Connect the TOC outlet hose to the transaxle.
Notice: Refer to Fastener Notice.
6. Install the TOC hose retainer and the bolt.
Tighten the bolt to 25 N.m (18 lb ft).
7. Lower the vehicle.
8. Connect the TOC outlet hose to the top side of the radiator.
Notice: Do NOT overfill the transaxle. The overfilling of the transaxle causes foaming, loss of fluid, shift complaints, and possible damage to the
transaxle.
9. Adjust the fluid level. Refer to the following procedures:
*
Transmission Fluid Checking
*
Fluid and Lubricant Recommendations
*
Capacities - Approximate Fluid
