Impala V6-3.9L (2007)
13. Install the automatic transaxle range selector cable retainer.
14. Place the transaxle in the Neutral position.
15. Place the shift control in the Neutral position.
16. Connect each cable section to the following before connecting the two cable sections.
*
Insert the metal end fitting of the shift control cable into the transaxle cable end.
*
Use the molded end fittings to push the metal end fitting of the shift control cable and the transaxle cable end together until the metal post
snaps into place.
17. Depress the adjuster clip once. This mobilizes the adjuster housing toward the transaxle end fitting.
18. Line up the end fittings so they slide together until you feel the parts cam together and lock.