Impala V8-5.3L (2008)
11. Install the J 45296, or equivalent to the front frame insulator you are removing.
12. Using the J 45296, or equivalent remove the front frame insulator from the frame.
Installation Procedure
1. Clean the front frame insulator opening.
2. Apply a thin coat of rubber lubricant GM P/N 01051717 (Canadian P/N 12345884) or equivalent to the inside of the front frame insulator opening.
3. Apply a thin coat of rubber lubricant GM P/N 01051717 (Canadian P/N 12345884) or equivalent to the front frame insulator.
4. Align the front frame insulator to the front frame opening with the front frame alignment tabs facing to the front.
5. Using the J 45296, or equivalent install the front frame insulator to the front frame.
6. Install the frame front upper insulators.
7. Raise the front of the frame.
Notice: Refer to Fastener Notice.
8. Install the front frame bolts and retainers.
Tighten the front frame bolts to 145 N.m (107 lb ft).
9. Remove the jackstand.