Impala V8-5.3L (2008)
1.
Install the front seat hooks into the floor pan.
2.
Install the rear seat adjuster bolts and tighten.
Tighten
Tighten the rear seat adjuster bolts to 45 N.m (33 lb ft).
3.
Install the seat belt to the seat frame.
4.
Install the seat belt anchor nut and tighten.
Tighten
Tighten the seat belt anchor nut to 42 N.m (31 lb ft).
16.
Install the front passenger seat head restraint.
17.
Enable the SIR system. Refer to SIR Disabling and Enabling in SI.
Parts Information
Warranty Information
For vehicles repaired under warranty, use the table.
Disclaimer