chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Trunk / Liftgate Weatherstrip > < Body - Front/Rear Window Noise When Operated|Page 19033
Page 1
background image

Sunroof / Moonroof Weatherstrip: Service and Repair

Sunroof Window Seal Replacement

Removal Procedure

1. Remove the sunroof window.
2. Remove the sunroof window seal from the sunroof window frame by pulling the sunroof window seal away at one point and continuing around the

perimeter of the sunroof window frame.

3. Wipe the perimeter of the sunroof window frame area with a clean, dampened cloth using window cleaner GM P/N 1050427 (Canadian P/N

992727), or isopropyl alcohol in order to clean the surface of the perimeter of the sunroof window frame.
Allow to air dry.

Installation Procedure

1. Position the sunroof window seal into the gutter of the sunroof window frame.

Important:  Ensure that the sunroof window seal is properly seated around the entire perimeter of the sunroof window frame.

2. Firmly press the sunroof window seal into place.
3. Install the sunroof window.

Trunk / Liftgate Weatherstrip > < Body - Front/Rear Window Noise When Operated|Page 19033