Impala V8-5.3L (2008)
45. Install the electrical center board (2). Ensure that the tabs have locked in place.
Install the fasteners (1).
Tighten
Tighten the fasteners to 7 Nm (62 lb in).
46. Install the forward lamp battery supply harness terminal and the fusible links (1) to the LH and RH fuse block battery studs in their original
positions and orientations.
47. Route the shortest Maxi-Fuse ring terminal lead (2) to the RH fuse block stud (2). Maintain sufficient clearance.
Route the longest Maxi-Fuse ring terminal lead (1) over the top of the fuse block to the LH fuse block stud (1). Maintain sufficient clearance.
Tighten
Tighten the fasteners to 7 Nm (62 lb in).