Impala V8-5.3L (2008)
5. Install the engine mount bracket.
6. Install the engine mount bracket bolts.
Tighten the bolts to 50 N.m (37 lb ft).
7. Using the engine support fixture, lower the engine .
8. Remove the engine support fixture.
9. Install the upper engine mount nuts.
Tighten the nuts to 50 N.m (37 lb ft).
10. Install the left exhaust manifold. Refer to Exhaust Manifold Replacement - Left Side (RPO LS4) (See: Exhaust System/Exhaust Manifold/Service
and Repair/Exhaust Manifold Replacement - Left Side)Exhaust Manifold Replacement - Left Side (RPOs LZE/LZ4/LZ8) (See: Exhaust
System/Exhaust Manifold/Service and Repair/Exhaust Manifold Replacement - Left Side) .
11. Install the engine mount strut. Refer to Engine Mount Strut Replacement (See: ) .
