Impala V8-5.3L (2008)
14. Connect the fuel feed line (1) to the fuel rail.
15. Position and install the brake master cylinder. Refer to Master Cylinder Replacement.
16. Install the air cleaner outlet duct.
17. Install the fuel fill cap.
18. Connect the negative battery cable.
19. Perform the following steps to inspect for leaks:
1. Turn ON the ignition for 2 seconds.
2. Turn OFF the ignition for 10 seconds.
3. Turn ON the ignition.
4. Inspect the system for leaks.
20. Install the engine sight shield.
