Impala V8-5.3L (2008)
*
Inspect for jacket assembly collapse by measuring the distance from the lower edge of the upper jacket to a defined point on the lower jacket.
Replace the jacket assembly if the measured dimensions are not within specifications.
*
Visually inspect the steering shaft for sheared injected plastic (1). If the steering shaft shows sheared plastic (1), replace the steering shaft.
*
Any frame damage that could cause a bent steering shaft must have the steering shaft runout checked. Using a dial indicator at the lower end of
the steering shaft, rotate the steering wheel. The runout must not exceed 1.60 mm (0.06 in).