Impala V8-5.3L (2008)
20. Install the intermediate shaft to the power steering gear stud shaft.
21. Install the lower pinch bolt to the power steering gear stud shaft.
Tighten
Tighten the bolts to 48Nm (35 lb ft).
22. Install the intermediate shaft seal into position.
23. Install the left front tire and wheel assembly.
24. Lower the vehicle.
25. Remove the J 42640 from the steering column.
26. The vehicle should not be moved off of the hoist for at least six hours. The rate of cure will depend on the ambient temperature.
Parts Information
Warranty Information
Disclaimer
