Impala V8-5.3L (2008)
16. Lower the vehicle until the frame contacts J 39580.
17. Remove the frame reinforcement nuts (3).
18. Remove the frame reinforcement bolts (1).
19. Remove the frame reinforcements (2).
20. Remove the bolts (1) which secure the frame to the body.
21. Raise the vehicle in order to separate the frame from the body.
22. If you are replacing the frame, remove the following components:
*
Both of the lower control arms-Refer to Lower Control Arm Replacement.
*
The stabilizer shaft-Refer to Stabilizer Shaft Replacement.
*
The spacers, the upper insulator, the lower insulator, and the retainers-Refer to Front Frame Cushion or Insulator Replacement and to Rear
Frame Cushion or Insulator Replacement.
Installation Procedure