Impala V8-5.3L (2008)
2. Install the differential carrier into the case.
3. Install the drive axle retainer rings (509) to the output shaft (510).
4. Hold the front differential carrier in place and carefully install the output shaft to the transmission through the left wheel opening.
5. Install the case extension housing. Refer Case Extension Replacement (See: Extension Housing/Service and Repair) .
6. Install left drive axle to the transaxle. Refer to Wheel Drive Shaft Replacement (See: Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair) .