Impala V8-5.3L (2008)
Disconnection and Connection (See: ) .
4. Fill the cooling system. Refer to Cooling System Draining and Filling (9C1, 9C3 Static Fill) Cooling System Draining and Filling (LZE, LZ4,
LZG, 9C1, 9C3, GE47716 Fill) Cooling System Draining and Filling (LZE, LZ4, LZG, Static Fill) .
5. Adjust the transmission fluid level.
6. Inspect for fluid leaks.
Transmission Fluid Auxiliary Cooler Inlet and Outlet Pipe Replacement
Transmission Fluid Auxiliary Cooler Inlet and Outlet Pipe Replacement
Removal Procedure
Notice: Allow sufficient clearance around the transaxle oil cooler pipes and around the hoses to prevent damage or wear which may cause fluid loss.
1. Remove the lower radiator air baffle. Refer to Radiator Air Lower Baffle and Deflector Replacement .
2. Remove the auxiliary transmission oil cooler lines from the support clip (3).
3. Remove the auxiliary transmission oil cooler lines from the fan shroud support clip.
4. Remove the inlet and outlet auxiliary transmission oil cooler lines (1, 2) from the transmission and radiator. Refer to Transmission Fluid Cooler
Hose/Pipe Quick-Connect Fitting Disconnection and Connection (See: ) .
5. Remove the inlet and outlet auxiliary transmission oil cooler lines from the auxiliary transmission oil cooler. Refer to Transmission Fluid Auxiliary
Cooler Replacement (See: Transmission Cooler/Service and Repair) .
Installation Procedure
1. Install the inlet and outlet auxiliary transmission oil cooler lines to the auxiliary transmission oil cooler. Refer to Transmission Fluid Auxiliary
Cooler Replacement (See: Transmission Cooler/Service and Repair) .
