Impala V8-5.3L (2008)
1. Install the oil pan gasket (25).
2. Install the oil pan (24).
Notice: Refer to Fastener Notice .
3. Install the oil pan bolts (23).
Tighten the bolts to 14 N.m (10 lb ft).
4. Lower the vehicle.
Notice: Refer to Do Not Overfill the Transmission Notice .
5. Fill the transaxle. Refer to Fluid Capacity Specifications (See: Specifications/Capacity Specifications) .
6. Place the gear selector in the PARK position.
7. Start the engine.
8. Run the engine at a slow idle. Do NOT race the engine.
9. Adjust the fluid level.
10. Inspect for leaks.