Impala V8-5.3L (2008)
1. Install the drive axle retainer rings (509) to the output shaft (510).
2. Hold the front differential carrier in place and carefully install the output shaft (510) to the transmission through the left wheel opening. Extend the
output shaft through the differential side gear.
3. Install the case extension housing. Refer to Case Extension Replacement (See: Extension Housing/Service and Repair) .
4. Install the left drive axle to the transaxle. Refer to Wheel Drive Shaft Replacement (See: Drive Axles, Bearings and Joints/Axle Shaft
Assembly/Service and Repair) .