Impala V8-5.3L (2008)
Shifter A/T: Service and Repair
4T65-E - Automatic Transaxle
Transmission Control Replacement
Removal Procedure
1. Remove the console trim plate . Refer to Front Floor Console Replacement (Impala) .
2. Remove the console wiring harness.
3. Remove the console shift control wiring harness.
4. Remove the automatic transaxle range selector cable. Refer to Range Selector Lever Cable Replacement (See: Shift Linkage/Shift Cable/Service
and Repair) .
5. Disconnect the lightbulb and the retainer from the shiftier.
