K 1500 Suburban 4WD V8-4.8L VIN V (2003)
3. Pre-assemble the oil pan gasket to the pan.
-
Install the gasket onto the pan.
-
Install the oil pan bolts to the pan and through the gasket.
4. Install the oil pan, gasket and bolts to the engine block.
5. Tighten the oil pan bolts until snug. Do not overtighten.
6. Install the transmission converter cover bolts until snug, if equipped with the 4L80-E automatic transmission.
7. Install the transmission bolt and stud on the right side until snug, if equipped with the 4L60-E automatic transmission.
Notice:
Refer to Fastener Notice in Service Precautions.
See: Service Precautions/Vehicle Damage Warnings/Fastener Notice
