K 1500 Suburban 4WD V8-5.3L VIN T (2002)
Sun Shade: Service and Repair
SUNSHADE PANEL REPLACEMENT
REMOVAL PROCEDURE
1. Remove the glass panel.
2. Remove the drain channel.
3. With the sunshade (1) in the closed position, push front (either side) sunshade spring (glider) (2) inward and release glider from the track.
Gently pull same corner of the sunshade outward and wiggle remaining gliders out of the track.
INSTALLATION PROCEDURE
1. Install sunshade (1) and place both gliders on one side into track. Now compress one of the other gliders (2) inward and slide into track. Repeat
this procedure for the last glider.
2. With the sunshade in halt open position, install the drain channel.
3. Install the glass panel.