K 1500 Suburban 4WD V8-5.3L VIN T (2002)
Exhaust Manifold Gasket: Service and Repair
Exhaust Seal Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
2. Remove the engine shield bolts and shield, if necessary.
3. Remove the oil pan skid plate bolts and plate, if necessary.
4. Disconnect the CPA retainer.
5. Disconnect the oxygen sensor electrical connector (1).
6. Support the catalytic converter or exhaust manifold pipe with adjustable jackstands.