K 1500 Suburban 4WD V8-5.3L VIN T (2002)
^
When replacing the fuel pipes, always replace them with original equipment or parts that meet the GM specifications for those parts. The
replacement pipes must have the same type of fittings as the original pipes in order to ensure the integrity of the connection.
^
DO NOT use copper or aluminum tubing to replace steel tubing. Only tubing meeting the 124-M specification or the equivalent is capable of
meeting all pressure, corrosion and vibration characteristics necessary to ensure the durability standard required.
1. Install the fuel pipes into the retaining clips (1).
2. Remove the caps from the rear fuel pipes.
3. Connect the chassis fuel feed and return pipes at the rear fuel feed and return pipes.
4. Install the EVAP canister.
