K 1500 Suburban 4WD V8-5.3L VIN T (2002)
Positive: Service and Repair
Battery Positive Cable Replacement - Auxiliary1
Auxiliary Battery to Battery Relay
REMOVAL PROCEDURE
1. Remove the auxiliary battery.
2. Reposition the boot to expose the stud.
3. Remove the auxiliary positive cable to relay nut.
4. Unclip the mega fuse from the auxiliary battery tray.
5. Remove the auxiliary battery positive cable.
INSTALLATION PROCEDURE
1. Install the auxiliary battery positive cable.
2. Clip the mega fuse to the auxiliary battery tray.
NOTE: Refer to Fastener Notice in Service Precautions.
3. Install the auxiliary positive cable nut.
Tighten
Tighten the auxiliary positive cable to relay nut to 9 N.m (80 lb in).
