K 1500 Suburban 4WD V8-5.3L VIN T (2002)
7. Install the J29193 or the J29194.
Tighten the J29193 or the J29194 to 54 Nm (40 ft. lbs.) in order to seat the tapers.
8. Remove the J29193 or the J29194.
9. Install the new relay rod prevailing torque nut.
Tighten the new prevailing torque nut to 62 Nm (46 ft. lbs.).
10. Install the engine protection shield, if equipped.
11. Lower the vehicle.
12. Check the wheel alignment.