K 1500 Suburban 4WD V8-5.3L VIN T (2002)
1. Install the bracket (3) to the rear of the pump (1).
Tighten the rear bracket retaining nuts to 50 Nm (37 ft. lbs.).
2. Install the pump.
3. Install the hose guide bracket bolt to the pump.
4. Install the bolt retaining the rear bracket to the engine.
5. Install the bolts to the front of the pump.
Tighten the bolts to 50 Nm (37 ft. lbs.).
6. For vehicles with variable effort steering connect the electrical connector.
7. Install the hoses to the pump.
Tighten the nut to 28 Nm (20 ft. lbs.).
8. Install the intermediate shaft.
9. Install the power steering pulley.
10. Fill and bleed the power steering system.
