chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Sensors and Switches - Steering > < Power Steering Pulley Replacement|Page 10281
Page 3
background image

Notice:  Refer to Fastener Notice in Service Precautions.

8. Install the pump mounting studs (2) to the pump housing (1). 

Tighten the pump mounting studs (2) to 58 Nm (43 ft. lbs.).  
Tighten the connector and fitting assembly (5) to 75 Nm (55 ft. lbs.). 

Sensors and Switches - Steering > < Power Steering Pulley Replacement|Page 10281