K 1500 Suburban 4WD V8-5.3L VIN T (2002)
12.2.
Align the connector so that the tabs (1) are perpendicular to the wrench flats on the tennon end.
12.3.
Engage the connector to the tennon by firmly pushing the connector down.
12.4.
Grasp the connector lock tabs (1, 2). Rotate the connector counterclockwise.
13. The connector is locked into place when you hear an audible snap and the tabs (1, 2) are aligned.
14. Dispose of the shock absorber.
Shock Absorber Disposal
Shock Absorber Disposal
Caution: Gas charged shock absorbers contain high pressure gas. Do not remove the snap ring from inside the top of the tube. If the snap
ring is removed, the contents of the shock absorber will come out with extreme force which may result in personal injury.
Caution: To prevent personal injury, wear safety glasses when centerpunching and trailing the shock absorber. Use care not to puncture the
shock absorber tube with the centerpunch.
