K 1500 Suburban 4WD V8-5.3L VIN Z Flex Fuel (2003)
Parking Assist Control Module: Service and Repair
Rear Object Alarm Detection Module Replacement (Utility)
REMOVAL PROCEDURE
1. Lift the right rear seating surface up to gain access to the rear parking aid module.
2. Disconnect the electrical connector from the module.
3. Remove the module retainer.
4. Remove the module from the seat frame.
INSTALLATION PROCEDURE
1. Install the module to the seat frame.
NOTE: Refer to Fastener Notice in Service Precautions.
Tighten
Tighten the module retainer to 1.7 N.m (15 lb in).
2. Connect the electrical connector.
3. Lower the seating surface.
