K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
3. If servicing a 4 wheel drive vehicle, install the engine mount assembly.
^
Tighten the bolts to 59 Nm (44 ft. lbs.).
^
Tighten the nuts to 45 Nm (33 ft. lbs.).
4. Lower the engine until the engine mount through bolt can be inserted.
5. Install the engine mount through bolt and the nut.
^
Tighten the through bolt nut to 68 Nm (50 ft. lbs.).
6. Remove the pole jack from the vehicle.
7. Connect both the battery negative cables to the batteries. Refer to Battery Cable in Powertrain Management.
