K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
Glow Plug: Service and Repair
Glow Plug - Left Side
REMOVAL PROCEDURE
TOOLS REQUIRED
J 39083 Glow Plug Connector Remover and Installer
Left Side of Vehicle
CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
1. Remove the negative battery cables.
2. Remove the glow plug lead wires using the J 39083 glow plug connector remover and installer.
3. Remove the glow plugs from cylinders 1, 3, 5 and 7. If a glow plug is damaged during removal, refer to Damaged Glow Plug Removal Damaged
Glow Plug Removal.
INSTALLATION PROCEDURE
1. Install the glow plugs.
Tighten
Tighten the glow plugs to 17 N.m (13 lb ft).
2. Install the lead wires to the glow plugs.
3. Install the negative battery cables.
