K 1500 Suburban 4WD V8-6.5L DSL Turbo VIN F (1999)
12. Adjust the caster and the camber angle together by turning the cam bolts until the specifications have been met.
-
Tighten the control arm bolts to 190 Nm (140 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.
13. Verify that the caster and the camber are within specifications.
If the caster and camber are within specifications, Refer to Front Toe Adjustment.
Front Wheel Toe Adjustment
1. Determine the toe-in (3) from the alignment equipment.
2. With the steering wheel in the straight and the locked position, loosen the inner to outer tie rod sleeves.
3. Adjust the toe by turning the steering linkage tie rod adjuster in order to achieve the proper toe specification.
4. Verify that the toe adjustment is within specifications. Refer to Wheel Alignment Specifications.
Tighten the tie rod adjuster sleeves.
-
Tighten the tie rod adjuster sleeves to 25 Nm (18 ft. lbs.).
Notice: Refer to Fastener Notice in Service Precautions.