chevrolet Workshop Repair Guides

Chevrolet Workshop Service and Repair Manuals

Drive Belt|Specifications > < Engine - Drive Belt Misalignment Diagnostics|Page 2475
Page 1
background image

Drive Belt: Technical Service Bulletins
A/C - Vibration/Noise Reissue

REISSUE
Number:

88-82-1B

Section:

1B

Date:

March, 1988

Subject:

AIR CONDITIONING NOISE/VIBRATION

Mode and Year:1988 C/K TRUCKS WITH AIR CONDITIONING

AND 4.3L, 5.0L AND 5.7L, ENGINES (VIN CODES Z, H, AND K)

TO:

ALL CHEVROLET DEALERS

This bulletin is being reissued at this time of year to help Chevrolet dealerships avoid misdiagnosis and possible replacement of good A/C compressors.

Some 1988 C/K trucks with 4.3L, 5.0L and 5.7L engines may exhibit a noise/vibration when the air conditioning is engaged. This noise/vibration is the
result of a resonance set up in the serpentine accessory drive system with air conditioning on. If this condition is experienced on 1988 C/K trucks built
before the VIN breakpoints listed below, install the following kits. Installation instructions are included with the kits.

Part Number

Engine

10085731

4.3L V-6 With A/C

10085730

5.0L/5.7L V-8 With A/C

All 1988 C/K trucks built after the following VIN breakpoints (last 7 digits) have had the above kits installed at the assembly plants.

Oshawa #2

Chevrolet

1178198

Fort Wayne

Chevrolet

Z158598

Pontiac East

Chevrolet

E142329

V-8 Labor Operation Number: T7415
V-6

Labor Operation Number: T7420

V-8

Labor Time:

.7 Hr. (+ .2 Hr.w/Air Pump)

V-6

Labor Time:

.8 Hr. (+ .2 Hr.w/Air Pump)

Drive Belt|Specifications > < Engine - Drive Belt Misalignment Diagnostics|Page 2475