K 1500 Truck 4WD V8-305 5.0L (1988)
Shift Linkage: Adjustments
New Process Model 203
Description
1. Align gage holes in levers (A) and (B) with gage hole in shifter assembly, then insert gage in (J).
2. Position arms (F and (G) in neutral position by placing arms straight down.
3. With swivel (E) and lock nuts (D) loosely assembled to rod (C), rotate swivel until ends of rod simultaneously enter lever (B) and arm (F).
4. Lock in position using retainers (K).
5. Tighten lock nuts against swivel ensuring that position of arm (F) does not change.
6. Repeat Steps 3 through 5 for rod (H), lever (A) and arm (G).
7. Remove gage pin.
