K 1500 Truck 4WD V8-350 5.7L VIN K TBI (1995)
14. Reverse procedure to install, noting the following:
a. Apply sealant to front cover block joint and to the rear crankshaft seal to block joint. Apply sealant approximately 1 inch in both directions
from each of the four corners.
b. Tighten oil pan attaching bolts and oil pan nuts in corners to the following specifications:
1994-5 Models, oil pan bolts 11Nm (100 lb. in.) and oil pan nuts 22Nm (16 lb. ft.).
1996 Models, all oil pan bolts and nuts 25Nm (18 lb. ft.).