K 1500 Truck 4WD V8-4.8L VIN V (2003)
11. Install the cable to the steering column bracket.
12. Ensure the tangs fully seat (snap) into the steering column bracket.
13. Install the cattle end to the steering column ball stud.
14. Stall the retainer securing the cable to the steering column.
15. Position the carpet and insulation around the drivers area.
16. install the drivers seat.
17. Install the instrument panes knee bolster.
18. Test the transmission for proper shift operation.
19. If all of the gear positions cannot be achieved, adjust the cable.
Automatic Transmission Range Selector Cable Bracket Replacement
Automatic Transmission Range Selector Cable Bracket Replacement
Removal Procedure
1. Apply the park brake